Atomizer Nozzles

Virtually limitless freedom of nozzle geometry

In principle these are 2- or 3 substance mixing nozzles. High sheering by the use of pressurized gas finely atomizes the liquid media. In case of highly pressurized liquids spontaneous atomization occurs. Typical applications: room humidification, lacquering, spray drying, granulation.

The clou of these nozzles is the totally free choice of the spray pattern. The construction principle allows nozzles with full-cone, flat-jet, ring-shaped, internally or externally directed spray pattern geometry. Besides the standard constructions shown here, almost any combination of shapes and sizes is possible.

Demonstration of nozzle geometry:


Areas of application:

  • food
  • disinfection
  • spray drying
  • spray crystallization
  • coating
  • spindle lubrication
  • chemical engineering (mixing, gassing, reaction)

Example: Central Spray Nozzle

Example: Linear Nozzle 1-jet Array

Example: Linear Nozzle 4-jet Array

Example: Ring Nozzle Inwards

Example: Linear Nozzle Outwards